The PAS Group were looking at doing their rebranding at the Bentleigh store. Having been looking quite weathered and dated, the store was in need of a fresh upgrade.
The client had provided the specifications for the designs and sizes. All works and graphics were provided which made it much easier for the manufacturing process. http://www.thepasgroup.com.au/
The client had provided the specifications for the designs and sizes. All works and graphics were provided which made it much easier for the manufacturing process. http://www.thepasgroup.com.au/
 |  |  |
As the old weathertex was worn and disheveled, it was taken down, a frame was needed to make sure the Alucobond would sit flush against the rough brick wall. A steel frame was fabricated to support the new sign. The frame was dynabolted to the brick to make sure it would be fixed securely to the wall.
   |   |
Three sheets of 4mm alucobond to make the length of the sign. Using flat heat screws, the fixings were countersunk into the sheet to minimise any adverse affects to the image. Black vinyl dots were placed over the screws to provide a clean finish.
RSS Feed
